Order Products : sales@su-jiao.com

ESENTTIA 07R87

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	9dtz5E_ESENTTIA-07R87.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: High ethylene control reologhy Random copolymer polypropylene; high cleanness and lot to lot uniformity; very good optical properties and gauge control; without slip and antiblock additives; ideal for special films formulations; Initial Heat Seal Temperature (IST) below 115 °C on non-treated face.

Recommended for: BOPP, Cast and TWQ Films heat seal co-extruded layer; conventional film properties modifier; injection molding general purpose applications.

General Information
Features	Clean/High Purity Controlled Rheology Food Contact Acceptable General Purpose Good Gauge Control Opticals Random Copolymer
Uses	Bi-axially Oriented Film Cast Film Film General Purpose
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Cast Film Coextrusion Film Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	7.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	20.3	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	15	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	600	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	80	J/m	ASTM D256A
Gardner Impact ⁵(23°C, 3.20 mm, Injection Molded)	31.1	J	ASTM D5420

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min
5 .	Method A

Resin Grade	Manufacturer	Category	Trademark
RTP 200 GB 30 TFE 15	RTP Company	Nylon 66	RTP
Ultraform® N 2650 Z6	BASF Corporation	Acetal (POM) Copolymer	Ultraform®
Asrene® UF 1810T	Chandra Asri Petrochemical	LLDPE	Asrene®
Dryflex® 50670	ELASTO	TPE	Dryflex®
Elastocon® CLR31FX	Elastocon TPE Technologies	TPE	Elastocon®