Order Products : sales@su-jiao.com
Salflex 140E
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Salflex Polymers Ltd. |
| Trademark: | Salflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9bZG93_Salflex-140E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Salflex 140E is a Thermoplastic Polyolefin Elastomer (TPO (POE)) product. It can be processed by blow molding, extrusion, or injection molding and is available in North America. Typical application: Automotive. Primary characteristic: impact resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.5 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.3 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 41 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 550 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 11.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 530 | % | ISO 37 |
| Tear Strength 1 | 81 | kN/m | ISO 34-1 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180/1A | ||
| -28°C | No Break | ||
| 23°C | No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 75.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 210 to 235 | °C | |
| Middle Temperature | 215 to 240 | °C | |
| Front Temperature | 220 to 240 | °C | |
| Nozzle Temperature | 220 to 240 | °C | |
| Processing (Melt) Temp | 210 to 230 | °C | |
| Mold Temperature | 27.0 to 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell Polyamide BJ-13 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Karina IVORY PVC COMPOUND 105850-35/ 1-B-ISE-LMP | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| PARAPET GR01240 | Kuraray Co., Ltd. | Acrylic (PMMA) | PARAPET |
| Sylvin 6920X08 Brown 7408 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LEXAN™ 505RU resin | SABIC Innovative Plastics | PC | LEXAN™ |
