Order Products : sales@su-jiao.com
MOSTEN MA 612
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | UNIPETROL RPA |
| Trademark: | MOSTEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9bA4nq_MOSTEN-MA-612.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Poylpropylene Mosten MA 612 is an impact resistant block copolymer with a special stabilization system ensuring good demoulding properties and low tendency to warpage. It is intended for injection moulding of parts with high demands on impact strength. The grade exhibits good balance between stiffness and toughness. Typical application is manufacture of technical parts such as cases, tools and transportation boxes, traveling cases shells, car battery boxes, etc. It can also be used as a matrix for manufacture of various compounds, especially in car industry. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 21.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 200 | % | ISO 527-2 |
| Flexural Modulus | 1050 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -20°C | 7.0 | kJ/m² | |
| 23°C | 45 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 52.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 145 | °C | ISO 306 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rainmaker Polypropylene MCCPTL20 | Rainmaker Polymers LLC | PP Copolymer | Rainmaker Polypropylene |
| Tecopet® PT74 GR30 BK002 DA | Eurotec Engineering Plastics | PET | Tecopet® |
| Clariant Nylon 6/6 PA-133 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Elastollan® S90AN | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyester | Elastollan® |
| HiFill® PP 0159 | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
