Order Products : sales@su-jiao.com

KRATON® G4610 H

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	9WyBCS_KRATON-G4610-H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton G4610 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 31%w (45 parts/100 part rubber (phr)). It is supplied in the physical form identified below. G4610 HU - supplied as an undusted powder crumb. Kraton G4610 H is used as a base material for thermoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4610H in applications that must withstand weathering and high processing temperatures.

Message

Kraton G4610 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 31%w (45 parts/100 part rubber (phr)). It is supplied in the physical form identified below.

G4610 HU - supplied as an undusted powder crumb.

Kraton G4610 H is used as a base material for thermoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4610H in applications that must withstand weathering and high processing temperatures.

General Information
Additive	Antioxidant
Features	Antioxidant Copolymer Good Weather Resistance High Heat Resistance
Uses	Plastics Modification
Appearance	White
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Antioxidant Additive ¹	0.020 to 0.060	%	Internal Method
Polystyrene Content ²	31 to 35	%	Internal Method
Total Extractables	25 to 37	%	Internal Method
Volatile Matter	< 1.0	%	Internal Method

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	> 5.52	MPa	Internal Method

Note Message
1 .	Non-staining phenolic antioxidant
2 .	Measured on the polymer before hydrogenation

Resin Grade	Manufacturer	Category	Trademark
TOTAL Polyethylene HDPE XS 10 OS	TOTAL Refining & Chemicals	HDPE	TOTAL Polyethylene
Ultramid® A3WG7 BK00564	BASF Corporation	Nylon 66	Ultramid®
DynaPath™ C1450CF	Polymer Dynamix	PBT	DynaPath™
GAPEX® RPP20EB07GY	Ferro Corporation	PP Homopolymer	GAPEX®
POLIGOM G/30	Crosspolimeri S.p.A.	EPDM	POLIGOM