Order Products : sales@su-jiao.com
Ebalta MG 453 GF / Comp. A+B
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9VVQMy_Ebalta-MG-453-GF-Comp-A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ebalta MG 453 GF is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Applications
Properties
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore D) | 81 to 87 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 2260 to 2760 | MPa | ISO 178 |
| Flexural Stress | 88.0 to 92.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 16 to 20 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 103 to 113 | °C | ISO 75-2/B |
| Glass Transition Temperature | 124 | °C | DMA |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 61 Mix Ratio by Weight: 60 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Post Cure Time | |||
| 70°C | 4.0 | hr | |
| 120°C | 4.0 | hr |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 1.27 to 1.31 | g/cm³ | |
| Curing Time (20°C) | 0.17 to 0.25 | hr | |
| Pot Life (20°C) | 0.92 to 1.0 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stylac™ IC39A | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| TAIRILAC AG12AJ | Formosa Plastics Corporation | ABS | TAIRILAC |
| Artenius TERMIO | Artenius | PET | Artenius |
| Formolene® 2550A | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| ELASTOSIL® P 7616-195 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® P |
