Order Products : sales@su-jiao.com
SEQUEL® E5000
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9TLNyC_SEQUEL-E5000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SEQUEL® E5000 thermoplastic olefinic elastomer (TPO) is designed for extrusion applications that require high mechanical stiffness, thermal stability, good low-temperature properties, and good dimensional stability over a broad temperature range. This material can be supplied with or without UV stabilizers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.97 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield, 4.00 mm) | 26.0 | MPa | ISO 527-2/50 |
| Flexural Modulus (4.00 mm) | 2620 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE | ASTM E228 | ||
| Flow : -30 to 80°C | 2.6E-5 | cm/cm/°C | |
| Transverse : -30 to 80°C | 2.6E-5 | cm/cm/°C |
| Note Message | |
|---|---|
| 1 . | 150x10x4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sup-tech A801 | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon 66 | Sup-tech |
| Absolac® XT04P | Styrolution | ABS | Absolac® |
| Kepamid® 1300CRM | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| ICORENE® 7620 Fuel Lock | ICO Polymers EMEA, A Division of A. Schulman | Nylon 6 | ICORENE® |
| ALTECH® PC ECO 1000/578 | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
