Order Products : sales@su-jiao.com

ACRYLITE® L40

Category:	Acrylic (PMMA) , Polymethyl Methacrylate Acrylic
Manufacturer:	Evonik Cyro LLC
Trademark:	ACRYLITE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	9SuGgH_ACRYLITE-L40.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ACRYLITE® L40 acrylic polymer is an amorphous thermoplastic molding compound based on polymethyl methacrylate (PMMA).

Typical properties of ACRYLITE® acrylic polymers are:

excellent weather resistance

high light transmission

high mechanical strength

high surface hardness and mar resistance

good melt flow rate

versatile colorability due to crystal clarity

The special properties of ACRYLITE® L40 polymer are:

low heat resistance

highest melt flow rate

UV light transmitting

medium levels of lubricant

Application:
Used for injection molding thin-wall medical devices requiring UV spectroscopy for fluid evaluation.

General Information
Additive	Lubricant
Features	Amorphous Good Colorability Good Flow Good Weather Resistance High Clarity High Hardness High Strength Lubricated Scratch Resistant
Uses	Medical/Healthcare Applications Thin-walled Parts
Agency Ratings	EC 1907/2006 (REACH)
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.19	g/cm³	ASTM D792
Apparent Density	0.66	g/cm³	ASTM D1895
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)	26	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.30 to 0.60	%	ASTM D955
Water Absorption (Equilibrium)	< 0.30	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	84		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3240	MPa	ASTM D638
Tensile Strength	60.7	MPa	ASTM D638
Tensile Elongation			ASTM D638
Yield	2.0 to 4.0	%
Break	2.0 to 4.0	%
Flexural Modulus	3030	MPa	ASTM D790
Flexural Strength	97.9	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 6.35 mm)	19	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed, 6.35 mm)	74.0	°C	ASTM D648
Vicat Softening Temperature	82.0	°C	ASTM D1525
CLTE - Flow (0 to 156°C)	7.2E-5	cm/cm/°C	ASTM D696

Optical	Nominal Value	Unit	Test Method
Transmittance (3200 µm)	92.0	%	ASTM D1003
Haze (3200 µm)	< 1.0	%	ASTM D1003
Yellowness Index (3.20 mm)	< 1.0	YI	ASTM D1925

Resin Grade	Manufacturer	Category	Trademark
PPR PPCO07	Premier Plastic Resins, Inc.	PP Copolymer	PPR
Solprene® 1205	Dynasol Elastomers	SBR, Solution	Solprene®
Moplen HP425J	PolyMirae	PP Homopolymer	Moplen
apinat® DP2267 P	API SpA	Biodeg Polymers	apinat®
OmniTech™ ABS GR30	OMNI Plastics, LLC	ABS	OmniTech™