Medalist® MD-12340 NAT Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Medalist(R) MD-12340 is a translucent high performance thermoplastic elastomer intended for use in medical and healthcare applications. Medalist(R) MD-12340 is a low density, low hardness, low odor grade that is suitable for extrusion and injection molding.

General Information
Features	Low Specific Gravity Low density Radiation disinfection Pressure cooker disinfection Ethylene oxide disinfection Anti-gamma radiation Good adhesion Good chemical resistance The smell is low to none Halogen-free Hardness, low
Uses	Rubber substitution Drug Medical/nursing supplies
Agency Ratings	ISO 10993 Part 5 ISO 13485
RoHS Compliance	RoHS compliance
Appearance	Translucent Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.878	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	2.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	42	ASTM D2240
Shaw A, 5 seconds	40	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
100% strain	1.10	MPa	ASTM D412
200% strain	1.83	MPa	ASTM D412
300% strain	2.72	MPa	ASTM D412
Tensile Strength ²(Break)	9.31	MPa	ASTM D412
Tensile Elongation ³(Break)	780	%	ASTM D412
Tear Strength ⁴	21.9	kN/m	ASTM D624
Compression Set ⁵(23°C, 22 hr)	13	%	ASTM D395

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	138 - 160	°C
Middle Temperature	160 - 182	°C
Front Temperature	171 - 193	°C
Nozzle Temperature	193 - 216	°C
Processing (Melt) Temp	193 - 216	°C
Mold Temperature	21 - 38	°C
Injection Pressure	1.38 - 5.52	MPa
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	138 - 149	°C
Cylinder Zone 2 Temp.	149 - 160	°C
Cylinder Zone 3 Temp.	160 - 182	°C
Cylinder Zone 4 Temp.	171 - 193	°C
Cylinder Zone 5 Temp.	171 - 193	°C
Die Temperature	182 - 204	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Medalist™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	9QgBeN_MedalistMD12340NAT.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Milastomer™ S-650BS	Mitsui Chemicals America, Inc.	TPV	Milastomer™
Sinpolene MBN7052	Teknor Apex Asia Pacific PTE. LTD.	LDPE	Sinpolene
Dynacom 403R	Dynachem Co. Ltd.	Nylon 6	Dynacom
HiFill® POM HO GF15	Techmer Engineered Solutions	Acetal (POM) Homopolymer	HiFill®
Hostacom M4 N01	LyondellBasell Industries	PP Homopolymer	Hostacom