Order Products : sales@su-jiao.com
Hostalen GC 7258
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hostalen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9PDyg9_Hostalen-GC-7258.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hostalen GC 7258 is a high density polyethylene (HDPE) resin used in injection molding applications such as cartridges, boxes and crates, and a variety of housewares. Hostalen GC 7258 combines a high ESCR with good flowability and rigidity. It also demonstrates good impact resistance and low warpage. Hostalen GC 7258 is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 8.0 | g/10 min | |
| 190°C/5.0 kg | 22 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1400 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 28.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 7.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 4.5 | kJ/m² | |
| 23°C | 4.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 72.0 | °C | ISO 306/B50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 304 FR | RTP Company | PC | RTP |
| Soarnol® E3808 | Soarus L.L.C. | EVOH | Soarnol® |
| Dyna-Purge® K | Dyna-Purge, division of Shuman Plastics | Proprietary | Dyna-Purge® |
| Keltan® 6951C | LANXESS Buna GmbH | EPDM | Keltan® |
| Plenco 08122 (Compression) | Plastics Engineering Co. | Polyester, TS | Plenco |
