Order Products : sales@su-jiao.com
Kemcor LD 9151
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9G7l2K_Kemcor-LD-9151.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 43 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 140 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 9.00 | MPa | |
| Break | 9.00 | MPa | |
| Tensile Elongation (Break) | 90 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 140 to 160 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE ME-2170N | Teknor Apex Company | TPE | Sarlink® TPE |
| Silplus® 60 EX | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| Biocycle 189C-1 | Biocycle | Biodeg Polymers | Biocycle |
| Fainplast PVC RKT 736/K1 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Sylvin 7833-75C Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
