Order Products : sales@su-jiao.com
RTP ESD 303 EM FR A
| Category: | PC , Polycarbonate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9CrZu1_RTP-ESD-303-EM-FR-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.20 - 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7580 | MPa | ASTM D638 |
| Tensile Strength | 96.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 2.0 - 4.0 | % | ASTM D638 |
| Flexural Modulus | 6890 | MPa | ASTM D790 |
| Flexural Strength | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 400 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 135 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | |||
| -- 1 | < 1.0E+10 | ohms | ASTM D257 |
| -- | < 1.0E+9 | ohms | ESD STM11.11 |
| Volume Resistivity | < 1.0E+5 | ohms·cm | ASTM D257 |
| Static Decay | FTMS 101C 4046.1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 2(1.50 mm) | V-0 | ASTM D3801 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 121 | °C | |
| Drying Time - Desiccant Dryer | 4.0 | hr | |
| Dew Point - Desiccant Dryer | -28.9 | °C | |
| Suggested Max Moisture | 0.020 | % | |
| Processing (Melt) Temp | 288 - 316 | °C | |
| Mold Temperature | 82.2 - 121 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | ESD STM11.11 |
| 2 . | Values per RTP Company testing. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene F52-01 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Miraprene® QS1621 | Mitsubishi Chemical Corporation | TPO (POE) | Miraprene® |
| Sylvin 9610-70 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Toler PE PE3953 | Toler Chemical, Inc | HDPE | Toler PE |
| ALTECH® ABS A 1000/106 GY2093-07LS | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
