Order Products : sales@su-jiao.com
Dryflex® PCW 92A331B
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9BK2Ck_Dryflex-PCW-92A331B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex PCW 92A331B: Thermoplastic Elastomer Base Material: TPO Hardness: 92 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE Special Features: This grade contains approximately 33% by weight of Post Consumer Waste |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.11 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 to 2.0 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 92 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 6.20 | MPa | ISO 37 |
| Tensile Stress (Yield) | 7.50 | MPa | ISO 37 |
| Tensile Elongation (Break) | 470 | % | ISO 37 |
| Tear Strength 2 | 58 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 to 200 | °C | |
| Middle Temperature | 170 to 200 | °C | |
| Front Temperature | 170 to 200 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on e.g. shape of the detail and placement of gate |
| 2 . | Method C, Crescent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxiglas® MG888 | Maxiglas Corporation | Acrylic (PMMA) | Maxiglas® |
| QAMAR CD18N | SPDC Ltd. | LLDPE | QAMAR |
| Sevrene® 3085-70A | Vi-Chem Corporation | TPE | Sevrene® |
| Ultramid® C40 L 01 | BASF Corporation | Nylon 66/6 | Ultramid® |
| Hostacom HBG H02 BLACK | LyondellBasell Industries | PP Homopolymer | Hostacom |
