Order Products : sales@su-jiao.com
Mediprene® 500502M
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Mediprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9AS5kG_Mediprene500502M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Mediprene 500502M: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 50 Shore A (4mm) Service Temperature Range: -50 -- +100°C (unstressed material) Colour: Transparent, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable Special Features: The material is based on medically approved raw materials. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 4.00 mm) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% secant | 1.40 | MPa | ASTM D638 |
| 300% secant | 2.50 | MPa | ASTM D638 |
| Tensile Strength | 6.00 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 28.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 - 100 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 210 | °C | |
| Middle Temperature | 150 - 210 | °C | |
| Front Temperature | 150 - 210 | °C | |
| Mold Temperature | 20 - 40 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 140 - 180 | °C | |
| Cylinder Zone 2 Temp. | 140 - 180 | °C | |
| Cylinder Zone 3 Temp. | 140 - 180 | °C | |
| Cylinder Zone 4 Temp. | 140 - 180 | °C | |
| Cylinder Zone 5 Temp. | 140 - 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene CPP1030 | Teknor Apex Asia Pacific PTE. LTD. | PP Homopolymer | Sinpolene |
| Sumikon® PM-9610 (Compression) | Sumitomo Bakelite North America, Inc. | Phenolic | Sumikon® |
| Hanwha Total PP RP100G160 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| LAMIGAMID® 324/327 | Schwartz Technical Plastic | Nylon 6 | LAMIGAMID® |
| TECACOMP® PA46 CF15 TF10 black 9076 | Ensinger GmbH | Nylon 46 | TECACOMP® |
