Order Products : sales@su-jiao.com
CABELEC® CA0887
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Cabot Corporation |
| Trademark: | CABELEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 99iGxF_CABELEC-CA0887.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CABELEC® 0887 is an electrically conductive compound based on carbon black and a copolymer of ethylene and vinyl acetate. It has been specially developed to give very low volume resistivity and a good flexibility. CABELEC 0887 has been designed for the production of flexible articles such as pipes, tubes, flooring and matting, for use in application where freedom from electrostatic hazard is an important consideration. Suggested areas of applications are ordnance and ammunition works, mines, petroleum plants and other environments, for example, powder handling. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.16 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) 2 | ISO 1133 | ||
| 190°C/10.0 kg | 0.30 | g/10 min | |
| 190°C/21.6 kg | 3.0 | g/10 min | |
| Molding Shrinkage - Flow 3 | 1.0 to 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 4(Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 5 | ISO 527-2 | ||
| Yield | 9.00 | MPa | |
| Break | 13.0 | MPa | |
| Tensile Strain 6(Break) | 250 | % | ISO 527-2 |
| Flexural Modulus 7 | 220 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 8(0.45 MPa, Unannealed) | 49.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature 9 | 73.0 | °C | ISO 306 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 10 | 1.0E+2 | ohms | Internal Method |
| Volume Resistivity 11 | 5.0 | ohms·cm | Internal Method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 150 to 170 | °C | |
| Cylinder Zone 2 Temp. | 150 to 170 | °C | |
| Cylinder Zone 3 Temp. | 150 to 170 | °C | |
| Cylinder Zone 4 Temp. | 150 to 170 | °C | |
| Cylinder Zone 5 Temp. | 150 to 170 | °C | |
| Melt Temperature | < 210 | °C |
| Note Message | |
|---|---|
| 1 . | CTM E023 |
| 2 . | CTM E005 |
| 3 . | CTM E047 |
| 4 . | CTM E030 |
| 5 . | CTM E041 |
| 6 . | CTM E041 |
| 7 . | CTM E040A |
| 8 . | CTM E038 |
| 9 . | CTM E039 |
| 10 . | CTM E042E |
| 11 . | CTM E043B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP PA6 20 GF BLK | RTP Company | Nylon 6 | RTP |
| Boda BDF25CP | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| Delta PER-3G40 | Delta Polymers | PE, Unspecified | Delta |
| Hytrel® HTR8351 NC021 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| Sylvin 8225-95UV Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
