Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroelastomer FT 2350
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 93a2xP_3M-Dyneon-Fluoroelastomer-FT-2350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3M™ Dyneon™ Fluoroelastomer FT 2350 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FT 2350 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.86 | g/cm³ | |
| State at Room Temperature | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKANATE™ G7013 | Mando Advanced Materials Co., Ltd. | PC | TEKANATE™ |
| Starglas FF006 | Eurostar Engineering Plastics | HDPE | Starglas |
| FRIANYL® A3 RV0 | Nilit Plastics | Nylon 66 | FRIANYL® |
| LNP™ THERMOCOMP™ KZ001L compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ THERMOCOMP™ |
| Sylvin 4250-50 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
