Order Products : sales@su-jiao.com
Epolene® C-10
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 92o0tS_Epolene-C-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epolene C-10 is a branched low density polyethylene homopolymer with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with Epolene C-10 exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat seal ability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | ||
|---|---|---|---|
| Molecular Weight 1 | 35000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 102 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 300 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity | |||
| 190°C | 3550 | mPa·s | |
| 125°C | 18600 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT GP2401G | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| AMTOPP TM40 | Inteplast Group | PP, Unspecified | AMTOPP |
| CompaDur® 121 GF 20 FR black (038) | DimeLika Plast GmbH | PBT | CompaDur® |
| Electrafil® POM CO AS | Techmer Engineered Solutions | Acetal (POM) Copolymer | Electrafil® |
| Tunhe PBT TH6080 | Xinjiang Blueridge Tunhe Chemical Industry Co.,Ltd | PBT | Tunhe PBT |
