Order Products : sales@su-jiao.com
TITANPRO® PM655
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Lotte Chemical Titan (M) Sdn. Bhd. |
| Trademark: | TITANPRO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8wDpID_TITANPRO-PM655.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene homopolymer. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(1)(i) and (c)1.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9003-07-0 APPLICATIONS: Slit tape and monofilament for rope, twine, yarn and industrial fabrics and thermoformed articles. Characteristics: Outstanding processability, maximum bubble stability for slit tape production by the tubular process, good melt stability and superior fiber strength, low color, low taste & odor, no plate-out problems on die lips or chill rolls and good heat-aging stability in yarn and fabric. FABRICATION: Equipment - general extrusion and techniques - standard processing for tubular and flat die tapes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.7 | g/10 min | ASTM D1238 |
| Water Absorption (24 hr) | 0.020 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus | 1720 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 54 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 95.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1201-55D | RTP Company | TPU-Polyester | RTP |
| Nymax™ GMF 604 40 UV Black 115 1 X 1 | PolyOne Corporation | Nylon 6 | Nymax™ |
| Celstran® PP-GF30-0455 P10/16 | Celanese Corporation | PP, Unspecified | Celstran® |
| Pro-fax SC973 | LyondellBasell Industries | PP Impact Copolymer | Pro-fax |
| MARPOL® F-M | Marco Polo International, Inc. | PS (EPS) | MARPOL® |
