Order Products : sales@su-jiao.com
Versaflex™ OM 6059-9
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Versaflex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8v41IP_Versaflex-OM-6059-9.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Versaflex™OM 6059-9 is specially designed to bond a variety of standard and modified nylon materials, including those that have undergone glass filling, thermal stabilization treatment and/or impact improvement.
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 58 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 23°C) | 1.75 | MPa | ASTM D412 |
| Tensile Strength (Break, 23°C) | 2.45 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 290 | % | ASTM D412 |
| Compression Set | ASTM D395B | ||
| 22°C, 22 hr | 14 | % | ASTM D395B |
| 70°C, 22 hr | 63 | % | ASTM D395B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity | ASTM D3835 | ||
| 200°C, 1340 sec^-1 | 75.0 | Pa·s | ASTM D3835 |
| 200°C, 11200 sec^-1 | 16.9 | Pa·s | ASTM D3835 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 182 - 204 | °C | |
| Middle Temperature | 243 - 266 | °C | |
| Front Temperature | 249 - 271 | °C | |
| Nozzle Temperature | 254 - 277 | °C | |
| Processing (Melt) Temp | 249 - 271 | °C | |
| Mold Temperature | 12.8 - 29.4 | °C | |
| Back Pressure | 0.00 - 0.552 | MPa | |
| Screw Speed | 80 - 120 | rpm |
| Injection instructions |
|---|
| 在使用此产品之前或之后，均须用熔体流动速率较低 (0.5 - 2.5 MFR) 的聚乙烯 (PE) 或聚丙烯 (PP) 彻底进行置换。Versaflex™ OM 6059-9 可利用高达 20% 的回收料同时其性能所受影响却极小，但该回收料必须是未受到污染的。为了最大限度地减小模塑期间其性能所受的影响，熔体温度应维持得尽可能低。回收料的有效性应由用户最终确定。Versaflex™ OM 6059-9 具有良好的熔体稳定性。最长停留时间可能会根据机筒尺寸有所变化。通常，如果机器闲置 8 - 10 分钟或以上，则应将机筒排空。不需要干燥注射速度：3 - 6 英寸/秒第一阶段 - 提升压力：300 - 800 psi第二阶段 - 保持压力：0% 的升压保持时间（厚部件）：0 - 4 秒保持时间（薄部件）：0 - 3 秒 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN T-035 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| RAMTAL PM3007G2 | Polyram Ram-On Industries | Acetal (POM) Copolymer | RAMTAL |
| Sylvin 7833-95UV Grey 9312 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Hifax TRC 103P 11BK03 | LyondellBasell Industries | PP Copolymer | Hifax |
| Jiangsu Sinarise EX9735X | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
