Order Products : sales@su-jiao.com
SumiDurez 150
| Category: | Phenolic , Phenolic |
| Manufacturer: | SumiDurez Singapore Pte Ltd |
| Trademark: | SumiDurez |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8uGNVo_SumiDurez-150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
150 Phenolic is a two-stage, asbestos-free, cost effective, heat resistant / electrical molding material. It exhibits superior dimensional stability, good strength retention at elevated temperature, and good molded appearance and machinability that account for its widespread use on electrical, and appliance applications. ASTM Type 13 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Apparent Density | 0.65 | g/cm³ | ASTM D1895 |
| Bulk Factor | 2.3 | ASTM D1895 | |
| Molding Shrinkage - Flow (Compression Molded) | 0.50 to 1.0 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 8960 | MPa | ASTM D638 |
| Tensile Strength (Yield, Compression Molded) | 48.3 | MPa | ASTM D638 |
| Flexural Strength (Compression Molded) | 68.9 | MPa | ASTM D790 |
| Compressive Strength | 193 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 15 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 191 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | 13 | kV/mm | ASTM D149 |
| Comparative Tracking Index (CTI) | 190 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.05 mm) | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® 8232G HS FR | BASF Corporation | Nylon 6 | Ultramid® |
| Ecomann® Bioresin EM20010 | Shenzhen Ecomann Biotechnology Co., Ltd. | PHA | Ecomann® |
| HIPOLEN P® MH 71 | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
| ExxonMobil™ HDPE HTA 001HP5 | ExxonMobil Chemical | HDPE, HMW | ExxonMobil™ HDPE |
| SQUARE® LIM8626-60A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
