AXELERON™ CS L-3364 NT CPD Datasheet,HDPE,The Dow Chemical Company-SHANGHAI SUSHENG

AXELERON™ CS L-3364 NT CPD

Wechat: WECHAT

Message
AXELERON™ CS L-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, especially in the more demanding grease-filled cable applications while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS L-3364 NT CPD provides excellent processibility for high-speed wire insulating extrusion processes. AXELERON™ CS L-3364 NT CPD provides excellent performance across the full range of telephone insulation applications, including aircore and grease-filled cable designs in both buried and aerial environments AXELERON™ CS L-3364 NT CPD is optimized to meet rigorous Telcordia (formerly Bellcore) age testing requirements, as well as all major international age testing standards and specifications for both solid and foam/skin insulation use. There is also considerable AXELERON™ CS L-3364 NT CPD use in a wide variety of other twisted pair, optic, coaxial and power cable designs. Specifications AXELERON™ CS L-3364 NT CPD meets the following raw material specifications: ASTM D 1248 Type III Category A-4, Grade E8 and E9 Federal LP-390 C, II-H, Grades 1 and 2, Category 4 Telephone wire insulated with AXELERON™ CS L-3364 NT CPD, using sound commercial extrusion practices, should meet the following cable specifications: REA PE 39 "Filled Telephone Cable" REA PE 89 "Filled Telephone Cable with Expanded Insulation" Telcordia GR-421-CORE, Issue 1; 3 "Generic Requirements for Metallic Telecommunications Cables" ICEA S-84-608 "Telecommunications Cable; Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements"

Message

AXELERON™ CS L-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, especially in the more demanding grease-filled cable applications while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS L-3364 NT CPD provides excellent processibility for high-speed wire insulating extrusion processes.

AXELERON™ CS L-3364 NT CPD provides excellent performance across the full range of telephone insulation applications, including aircore and grease-filled cable designs in both buried and aerial environments AXELERON™ CS L-3364 NT CPD is optimized to meet rigorous Telcordia (formerly Bellcore) age testing requirements, as well as all major international age testing standards and specifications for both solid and foam/skin insulation use. There is also considerable AXELERON™ CS L-3364 NT CPD use in a wide variety of other twisted pair, optic, coaxial and power cable designs.

Specifications
AXELERON™ CS L-3364 NT CPD meets the following raw material specifications:

ASTM D 1248 Type III Category A-4, Grade E8 and E9

Federal LP-390 C, II-H, Grades 1 and 2, Category 4

Telephone wire insulated with AXELERON™ CS L-3364 NT CPD, using sound commercial extrusion practices, should meet the following cable specifications:

REA PE 39 "Filled Telephone Cable"

REA PE 89 "Filled Telephone Cable with Expanded Insulation"

Telcordia GR-421-CORE, Issue 1; 3 "Generic Requirements for Metallic Telecommunications Cables"

ICEA S-84-608 "Telecommunications Cable; Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements"

General Information
Uses	Thin wall insulation Telephone insulator Wire and cable applications Solid insulation Communication wire insulation material
Agency Ratings	ASTM D 1248, III, Class A, Cat. 4, Grade E8 ASTM D 1248, III, Class A, Cat. 4, Grade E9 FED L-P-390C, Type II, Class H, Category 4, Grade 1 ICEA S-84-608 REA PE-39 REA PE-89
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.945	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.80	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (50°C, 100% Igepal, F0)	> 48.0	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	23.4	MPa	ASTM D638
Tensile Elongation (Break)	500	%	ASTM D638

Aging	Nominal Value	Unit	Test Method
Tensile strength retention- 48 hrs (100°C)	90	%	ASTM D638
Elongation retention rate- 48 hrs (100°C)	90	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Heat resistant stress crack- F0	> 96	hr	ASTM D2951
Oxidation Induction Time ¹(200°C)	170	min	ASTM D4565
Brittleness Temperature ²	-76.0	°C	ASTM D746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity (23°C)	> 1.0E+15	ohms·cm	ASTM D257
Dielectric Constant ³(1 MHz)	2.32		ASTM D1531
Dissipation Factor (1 MHz)	6.0E-5		ASTM D1531

Extrusion	Nominal Value	Unit
Melt Temperature	218 - 260	°C

Extrusion instructions
AXELERON™ CS L-3364 NT CPD provides excellent surface finish and good output rates over a broad range of extrusion conditions. AXELERON™ CS L-3364 NT CPD is typically extruded at melt discharge temperatures ranging from 425 to 500°F (220 to 260°C) using conductor preheats ranging from 230 to 290°F (110 to 140°C). Specific extrusion conditions can be recommended only when the application, processing speed and processing equipment details are known.

Extrusion instructions

AXELERON™ CS L-3364 NT CPD provides excellent surface finish and good output rates over a broad range of extrusion conditions. AXELERON™ CS L-3364 NT CPD is typically extruded at melt discharge temperatures ranging from 425 to 500°F (220 to 260°C) using conductor preheats ranging from 230 to 290°F (110 to 140°C). Specific extrusion conditions can be recommended only when the application, processing speed and processing equipment details are known.

Note Message
1 .	Aluminum pan O/T testing of 0.25 mm film samples 80°C ETPR cable type filler was used.
2 .	F0
3 .	After 14 days Water Immersion at 23°C (73°F)

Resin Grade	Manufacturer	Category	Trademark
Marlex® HHM 5502LD	Chevron Phillips Chemical Company LLC	HDPE	Marlex®
Propilven J-750	Propilven, S.A.	PP Random Copolymer	Propilven
Dutral® TER 4044	Versalis S.p.A.	EPDM	Dutral®
Guang Sung PVC GPMA80	Guang Sung Plastics (GSPL)	PVC, Flexible	Guang Sung PVC
LNP™ LUBRICOMP™ DFL42 compound	SABIC Innovative Plastics	PC	LNP™ LUBRICOMP™

Category:	HDPE , High Density Polyethylene Solid Insulation Compound
Manufacturer:	The Dow Chemical Company
Trademark:	AXELERON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8tiahs_AXELERON-CS-L-3364-NT-CPD.pdf
PRICE:	Order Products email sales@su-jiao.com