Order Products : sales@su-jiao.com
Flexirene® MS 40 A
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Flexirene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8tVCp0_Flexirene-MS-40-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flexirene MS 40 A is a linear low density polyethylene (LLDPE) with antioxidants, suitable for injection moulding application. Parts made by Flexirene MS 40 A are characterised by a good balance between impact resistance and rigidity. Main Application Flexirene MS 40 A is recommended for the production of large sized articles, houseware and toys. Flexirene MS 40 A is characterized by a high flowability which make it ideal for masterbatches preparation for LDPE and LLDPE. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 27 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 52 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 11.0 | MPa | |
| Break, Injection Molded | 12.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | > 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 300 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 103 | °C | ISO 306/A |
| Melting Temperature | 121 | °C | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 210 | °C | |
| Middle Temperature | 160 to 210 | °C | |
| Front Temperature | 160 to 210 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Softflex® 8795 | Network Polymers, Inc. | TPE | Softflex® |
| Elastron® G G100.A75.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Hetron™ D 1222 | Ashland Performance Materials | Vinyl Ester | Hetron™ |
| Keltan® 6675 | LANXESS Buna GmbH | EPDM | Keltan® |
| Infino NH-1023P | SAMSUNG SDI CO., LTD. | PC | Infino |
