Order Products : sales@su-jiao.com
Estane® 58370 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8srPiD_Estane-58370-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58370 TPU is an 80A Polyether-Type Thermoplastic Polyurethane. Features: Halogenated flame retardant compound Uses: Extrusion - Wire and cable and general application where flame retardant properties are needed |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 77 - 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel) | 3.00 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 4.80 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 6.60 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 29.7 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 690 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 59.8 | kN/m | ASTM D624 |
| Cracking | 18 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -50.0 | °C | DSC |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-2 | UL 94 | |
| Oxygen Index | 28 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 175 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 188 | °C | |
| Cylinder Zone 4 Temp. | 194 | °C | |
| Adapter Temperature | 194 | °C | |
| Melt Temperature | 188 | °C | |
| Die Temperature | 188 - 194 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ecomass® 1002ZD93 | Ecomass Technologies | Nylon Copolymer | Ecomass® |
| HiFill® PA6/6 0249 B | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Lanufene LLF 181N | Ras Lanuf Oil & Gas Processing Company (RASCO) | LLDPE | Lanufene |
| Kanghui KH2110 | Yingkou Kanghui Petrochemical Co., LTD. | PBT | Kanghui |
| LNP™ LUBRICOMP™ QCL34 compound | SABIC Innovative Plastics | Nylon 610 | LNP™ LUBRICOMP™ |
