Order Products : sales@su-jiao.com
Plasmer 5045N/1002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HYUNDAI EP Co., Ltd. |
| Trademark: | Plasmer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8rkEWw_Plasmer-5045N-1002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Wide service temperature range, resistance, compression set, recyclable |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.990 to 1.01 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/7.06 kg) | > 60 | g/10 min | ASTM D1238 |
| Gel Content | < 1.00 | Gel No./m | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 32 to 38 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.392 to 0.981 | MPa | ASTM D412 |
| Tensile Strength (Yield) | > 7.85 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 700 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuang-Bang WM-7508S | Shuang-Bang Industrial Corp. | Film, TPU | Shuang-Bang |
| Akulon® K222-DL | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Dynaflex™ G7670-1 (Natural) | PolyOne Corporation | TPE | Dynaflex™ |
| Luflexen hyPE 35 P FA | LyondellBasell Industries | MDPE | Luflexen |
| Plaslube® PA12 TS18 | Techmer Engineered Solutions | Nylon 12 | Plaslube® |
