Order Products : sales@su-jiao.com
Generic PPS - Mineral
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8qWefc_Generic-PPS---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPS - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage | |||
| Flow : 23°C | 0.020 - 0.31 | % | ASTM D955 |
| 23°C | 0.30 - 1.1 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 11200 - 19400 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 191 - 271 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 124 - 150 | °C | |
| Drying Time | 3.0 - 4.1 | hr | |
| Processing (Melt) Temp | 170 - 335 | °C | |
| Mold Temperature | 125 - 156 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPS - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2700 S-50A Z | RTP Company | SEBS | RTP |
| SNOLEN® EP 0.26/51 N | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| ABSCOM® F335 | Polymer Compounders Limited | ABS | ABSCOM® |
| DELOXEN 2010 | Vamp Tech | PPE+PS | DELOXEN |
| Elvax® 150W | DuPont Packaging & Industrial Polymers | EVA | Elvax® |
