Order Products : sales@su-jiao.com
CERTENE™ LLHF-122XH
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8oZHQN_CERTENE-LLHF-122XH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLHF-122XH is a certified prime grade Ethylene-Hexene Copolymer specially developed for extrusion of SUPER STRENGTH Blown films of outstanding Impact and Toughness. LLHF-122XH features good processability and films exhibit exceptional Elmendorf Tear strength and Puncture resistance. LLHF-122XH major applications include super strong liners, lamination films, stretch wrapping films, and super strong carry-on-bags. Maximum recommended film drawdown is 0.3 mil. LLHF-122XH contains high slip and extra high antiblock. LLHF-122XH complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD | 193 | MPa | ASTM D882 |
| 1% secant, TD | 207 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 11.0 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 11.7 | MPa | ASTM D882 |
| MD : Break, 25 µm | 55.2 | MPa | ASTM D882 |
| TD : Break, 25 µm | 40.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 650 | % | ASTM D882 |
| TD : Break, 25 µm | 780 | % | ASTM D882 |
| Dart Drop Impact 1(25 µm) | 480 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 430 | g | ASTM D1922 |
| TD : 25 µm | 750 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.4 µm, Blown Film) | 55 | ASTM D2457 | |
| Haze (25.4 µm, Blown Film) | 12 | % | ASTM D1003 |
| Additional Information |
|---|
| Film Specimen: 1.0 mil (25 micron) film, melt temperature 420-450°F (215-230°C), blow-up-ratio 2.5 :1. |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ASTALAC™ ASA 305 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| Hapsil™ 360 | Hapco Inc. | Rubber | Hapsil™ |
| HiFill FR® PA6/6 GF50 FR BK | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
| Infino HI-1001B | SAMSUNG SDI CO., LTD. | PC+ABS | Infino |
| LGG 1042 | LG Polymers India Pvt. Ltd. | PS (GPPS) | LGG |
