Order Products : sales@su-jiao.com
For-Tec E OC6OAZ (Series: AD/PAX/MR)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | For-Tec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8nVZGN_For-Tec-E-OC6OAZ-Series-AD-PAX-MR-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The AD/PAX/MR Series is your material solution for two-component-seals in electronic applications and soft-touch grips and handles of machine tools. The material provides an excellent resistance to skin oils, suncream, olive oil and acetone, accompanied by outstanding adhesion properties to semi-aromatic polyamids and polyarylamids such as PA 12, PA 6 und PA 6.6. The series is available in natural and black colors. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 5.50 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 700 | % | ISO 37 |
| Tear Strength | 25 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 23 | % | ISO 815 |
| 70°C, 24 hr | 57 | % | ISO 815 |
| 100°C, 24 hr | 68 | % | ISO 815 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Adhesion to Nylon | 22.0 | kN/m | Renault D41/1916 |
| Adhesion to Polyarylamide | 6.0 | kN/m | Renault D41/1916 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 - 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 240 | °C | |
| Mold Temperature | 60.0 - 80.0 | °C | |
| Injection Pressure | 20.0 - 100 | MPa | |
| Back Pressure | 2.00 - 5.00 | MPa |
| Injection instructions |
|---|
| Hot Runner Temperature: 200 - 250°CThe runner should be empty after a maximum of 2 - 3 shots. |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 3405-3 TFE 15 | RTP Company | LCP | RTP |
| Sarlink® TPE EE-2645DN XRD (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
| Abistir® MR GF/17 V0 NATURALE | SO.F.TER. SPA | ABS | Abistir® |
| EXCELLOY CK10G30 | Techno Polymer Co, Ltd. | PC+ABS | EXCELLOY |
| Hylon® N1213STL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
