Order Products : sales@su-jiao.com
Artenius DESIGN
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Artenius |
| Trademark: | Artenius |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8m3lOM_Artenius-DESIGN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Artenius DESIGN is a copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin has been specially designed for thick wall applications. This grade presents a higher IV and outstanding mechanical properties. Suitable for thick sheet extrusion up to a thickness of approximately 5 mm, sealing films and refillable bottles up to 5 gallons. It is particularly recommended for use in thick wall preforms, which need slow crystallization to achieve high light transmission, excellent brightness for thick sheets and a neutral colour tone. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | > 1.39 | g/cm³ | |
| Apparent Density | 0.84 | g/cm³ | |
| Viscosity Number (Reduced Viscosity) | 84.0 to 88.0 | ml/g | ISO 1628 |
| Acetaldehyde | < 1.0 | ppm | ASTM F2013 |
| Color b | < 0.00 | ASTM D6290 | |
| Color L | > 85.0 | ASTM D6290 | |
| Crystallinity | > 48 | % | |
| Moisture | < 0.20 | % | |
| Weight - of 20 Chips | 320.0 | mg |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 235 to 245 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 165 to 175 | °C | |
| Drying Time | 5.0 to 6.0 | hr | |
| Melt Temperature | 265 to 280 | °C |
| Note Message | |
|---|---|
| 1 . | Crystalline |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3617 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Mecoline IS RDX 1231 F | Melos GmbH | TP, Unspecified | Mecoline |
| Sinvicomp SFR5800C2 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| INSULCAST® 333/INSULCURE 9 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| ESTOPLAST XU 6340GY64 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
