Order Products : sales@su-jiao.com

Marlex® PP HGZ-120SP

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Saudi Polymers Company
Trademark:	Marlex® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8i9YYw_Marlex-PP-HGZ-120SP.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Typical raffia, fiber/yarn, injection moulding applications include:

General purpose injection moulding

Multifilament fiber

Good resistance to gas fading

General Information
Features	Homopolymer Resistance to gas fading Compliance of Food Exposure
Uses	General Filament Fiber Line
Agency Ratings	FDA not rated Europe No 10/2011
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.903	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	12	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (shaw d, 3.20mm, injection molding)	71		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	37.0	MPa	ASTM D638
Flexural Modulus - Secant ²(3.20 mm, Injection Molded)	1860	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	27	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm, Injection Molded)	104	°C	ASTM D648

Additional Information
Mechanical properties were determined using injection-moulded specimens 3.2 mm thick, moulded per ASTM D4101, unless otherwise noted.

Note Message
1 .	51 mm/min
2 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 200 A SI 2	RTP Company	Nylon 6	RTP
Telcar® TL-1445U	Teknor Apex Company	TPE	Telcar®
ALCOM® PC 740/4 UV GY1156-04LD	ALBIS PLASTIC GmbH	PC	ALCOM® PC
Galloo GP-PP-128	Galloo Plastics	PP, Unspecified	Galloo
Kepital® FV-30A	Korea Engineering Plastics Co., Ltd	Acetal (POM) Copolymer	Kepital®