Order Products : sales@su-jiao.com
KMI PE KM-4112
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8hWrvt_KMIPEKM4112.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KM-4112 is a Butene Copolymer LLDPE resin used in injection molding. Applications include thin wall lids, caps and closures, and compounding. This grade features excellent processability, cold temperature impact resistance, outstanding flexibility and warpage resistance, good organoleptic properties and high surface gloss. KM-4112 also contains a processing antioxidant. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.925 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 52 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 10.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 10.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 100 | % | ASTM D638 |
| Flexural Modulus | 345 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 87.2 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Snake Flow | 356 | mm | Internal method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zythane® 4090A | Alliance Polymers & Services | TPU-Polyester | Zythane® |
| Fainplast PVC GS 60 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| LubriOne™ PC-000/5T-2S BK002 | PolyOne Corporation | PC | LubriOne™ |
| TechnoElast S A9000 I 1 nat | TechnoCompound GmbH | TPE | TechnoElast |
| Silastic® Q7-4720 | Dow Corning Corporation | Silicone | Silastic® |
