Order Products : sales@su-jiao.com

Tufel® II 94205

Category:	Silicone , Silicone
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Tufel® II
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8ck34P_Tufel-II-94205.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Tufel II 94305 Rubber Compounds 94205 and 94305 are 20 and 30 durometer low volatile, fast-cure, addition cured silicone elastomers for molding. They may be used by themselves or blended to intermediate durometers. Applications include fabricated molding that require short cycle time, deep section cures, and parts with low extractable requirements. Key Features and Benefits LV Bases Minimize Post Cure Times Totally Peroxide-Free Cure System Significant Reduction in Molding Cycle Systems Lower Molding Temperature Range (150-166C) (300-330F) Superior Mixed Shelf Life Tight Surface Cure Non-blooming Translucency

Message

Tufel II 94305 Rubber Compounds 94205 and 94305 are 20 and 30 durometer low volatile, fast-cure, addition cured silicone elastomers for molding. They may be used by themselves or blended to intermediate durometers. Applications include fabricated molding that require short cycle time, deep section cures, and parts with low extractable requirements.

Key Features and Benefits

LV Bases Minimize Post Cure Times

Totally Peroxide-Free Cure System

Significant Reduction in Molding Cycle Systems

Lower Molding Temperature Range (150-166C) (300-330F)

Superior Mixed Shelf Life

Tight Surface Cure

Non-blooming

Translucency

General Information
Features	Fast Cure Fast Molding Cycle Low Extractables Non-Blooming
Agency Ratings	FDA 21 CFR 177.2600 USP Class VI
Appearance	Translucent

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	22		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.400	MPa	ASTM D412
Tensile Strength	8.30	MPa	ASTM D412
Tensile Elongation (Break)	1000	%	ASTM D412
Tear Strength ¹	22.0	kN/m	ASTM D624

Uncured Properties	Nominal Value	Unit
Density	1.07	g/cm³

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
MBA PP 2126	MBA Polymers	PP Impact Copolymer	MBA PP
Sup-tech A705H	Shanghai Suptech Engineering Plastics Co. Ltd.	Nylon, Unspecified	Sup-tech
Monprene® OM-12250	Teknor Apex Company	TPE	Monprene®
VYPET VNT 835B	Lavergne Group	PET	VYPET
Jam HDPE HH4765	Jam Petrochemical Company	HDPE	Jam HDPE