Order Products : sales@su-jiao.com
Tekumid 6 T/GF 50
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | TEKUMA Kunststoff GmbH |
| Trademark: | Tekumid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8bZPyu_Tekumid-6-T-GF-50.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tekumid 6 T/GF 50 is a polyamide 6 (nylon 6) material, and the filler is 50% glass fiber reinforced material. This product is available in Europe,. The main characteristics of Tekumid 6 T/GF 50 are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.56 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 - 0.30 | % | ASTM D955 |
| Water Absorption 1(Equilibrium, 23°C, 50% RH) | 0.80 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 160 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1.7 | % | ISO 527-2 |
| Flexural Modulus | 6700 | MPa | ISO 178 |
| Flexural Stress | 250 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 215 | °C | ISO 306/B120 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 21 | kV/mm | ASTM D149 |
| Comparative Tracking Index | IEC 60112 | ||
| Solution a | 500 | V | IEC 60112 |
| Solution B | 350 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 | |
| Glow Wire Ignition Temperature (2.00 mm) | 600 | °C | IEC 60695-2-13 |
| Additional Information |
|---|
| Application Temperature, IEC 216, 20.000 hr: 120°C |
| Note Message | |
|---|---|
| 1 . | 24H |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3816 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TAROPRENE® 2 A60 E1G | Taro Plast S.p.A. | TPV | TAROPRENE® |
| Visico™ LE0540 | Borealis AG | XLPE | Visico™ |
| ELASTOSIL® LR 3856/30 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Lustran® Elite 1827 | Styrolution | ABS | Lustran® Elite |
