Order Products : sales@su-jiao.com
GLAMIDE® TY-102ND
| Category: | Nylon 6 Elast , Polyamide 6 Elastomer |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | GLAMIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8YFZRV_GLAMIDE-TY-102ND.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GLAMIDE®TY-102ND is a polyamide 6 elastomer (nylon 6 elastomer) product,. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.09 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| 1.00 mm | 0.70 - 1.0 | -- | % | ASTM D955 |
| 3.00 mm | 1.5 - 2.0 | -- | % | ASTM D955 |
| Water Absorption | ASTM D570 | |||
| 24 hr | 1.0 | -- | % | ASTM D570 |
| Equilibrium, 65% RH | 2.9 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 102 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield, -40°C | 85.0 | 74.0 | MPa | ASTM D638 |
| Yield, 23°C | 50.0 | 27.0 | MPa | ASTM D638 |
| Yield, 80°C | 21.0 | 15.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 200 | 200 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | |||
| -40°C | 2700 | 2300 | MPa | ASTM D790 |
| 23°C | 2000 | 800 | MPa | ASTM D790 |
| 80°C | 600 | 200 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | |||
| Yield, -40°C | 94.0 | 87.0 | MPa | ASTM D790 |
| Yield, 23°C | 75.0 | 35.0 | MPa | ASTM D790 |
| Yield, 80°C | 27.0 | 17.0 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 8.00 | -- | mg | ASTM D1044 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 150 | 180 | J/m | ASTM D256 |
| 23°C | 310 J/m | No Break | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 150 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 58.0 | -- | °C | ASTM D648 |
| CLTE - Flow | 8.7E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 18 | 14 | kV/mm | ASTM D149 |
| Arc Resistance | 125 | 108 | sec | ASTM D495 |
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | HB | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Tensile Elongation, ASTM D638, 23°C: >200 %Comparative Tracking Index, IEC Method: >600 V |
| 调节后的 Tensile Elongation, ASTM D638, 23°C: >200 %Comparative Tracking Index, IEC Method: >600 V |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 245 - 285 | °C | |
| Mold Temperature | 50.0 - 80.0 | °C | |
| Injection Pressure | 40.0 - 80.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TITANEX® HM4560UA | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANEX® |
| 3M™ Dyneon™ PTFE TF 2072Z | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
| Alcryn® 3075 NC | Advanced Polymer Alloys | MPR | Alcryn® |
| DuraElast 1730-70 | Evermore Chemical Industry Co., Ltd. | TPU-Polyester | DuraElast |
| DURACON® SX-35 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
