Order Products : sales@su-jiao.com
DynaMix™ XP-5531
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8WRwKn_DynaMix-XP-5531.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
High Temperature Polymer Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 55.2 | MPa | |
| Break | 54.5 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 9.0 | % | |
| Break | 24 | % | |
| Flexural Modulus | 1930 | MPa | ASTM D790 |
| Flexural Strength | 69.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 420 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 to 82.2 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 277 to 293 | °C | |
| Middle Temperature | 288 to 304 | °C | |
| Front Temperature | 299 to 316 | °C | |
| Nozzle Temperature | 299 to 316 | °C | |
| Processing (Melt) Temp | 299 to 316 | °C | |
| Mold Temperature | 121 to 149 | °C | |
| Injection Pressure | 68.9 to 138 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Clamp Tonnage | 5.5 to 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8260-60 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Axiall PVC 8895 | Axiall Corporation | PVC, Unspecified | Axiall PVC |
| KEBAFLEX® SG 85 A.1 | BARLOG plastics GmbH | TES | KEBAFLEX® |
| OP - PC - Filled 10GF | Oxford Polymers | PC | OP - PC - Filled |
| TECACOMP® PEEK 450 GF30 natural 9582 | Ensinger GmbH | PEEK | TECACOMP® |
