Order Products : sales@su-jiao.com

VECTOR® 4213A

Category:	SIS+SI , Styrene Isoprene Styrene + SI Block Copolymer
Manufacturer:	Dexco Polymers LP
Trademark:	VECTOR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8U7OC2_VECTOR-4213A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VECTOR 4213A Styrene-Isoprene-Styrene/Styrene-Isoprene (SIS/SI) Block Copolymer SIS triblock / SI diblock (SIS/SI)(1) copolymer blend. Contains ~25% SI diblock copolymer. Medium styrene copolymer. Outstanding thermal stability and melt processability. Supplied as a dense pellet, dusted with talc. VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information. VECTOR 4213A is a blend of linear, pure styrene-isoprene-styrene triblock and pure styrene-isoprene diblock copolymers. The individual components are produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is not formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite). It is suited for applications where a higher modulus, higher temperature end-use, and enhanced creep resistance is desired versus VECTOR 4113A SIS/SI. It is designed for use in hot melt adhesive applications such as disposable adhesives requiring superior cohesive strength and heat resistance along with low creep compliance.

Message

VECTOR 4213A
Styrene-Isoprene-Styrene/Styrene-Isoprene (SIS/SI) Block Copolymer

SIS triblock / SI diblock (SIS/SI)(1) copolymer blend.

Contains ~25% SI diblock copolymer.

Medium styrene copolymer.

Outstanding thermal stability and melt processability.

Supplied as a dense pellet, dusted with talc.

VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information.

VECTOR 4213A is a blend of linear, pure styrene-isoprene-styrene triblock and pure styrene-isoprene diblock copolymers. The individual components are produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is not formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).

It is suited for applications where a higher modulus, higher temperature end-use, and enhanced creep resistance is desired versus VECTOR 4113A SIS/SI. It is designed for use in hot melt adhesive applications such as disposable adhesives requiring superior cohesive strength and heat resistance along with low creep compliance.

General Information
Features	Copolymer Food Contact Acceptable Good Creep Resistance Good Processability Good Thermal Stability High Heat Resistance High Strength
Uses	Adhesives
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.938	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	1.2	g/10 min	ASTM D1238
Solution Viscosity	970	mPa·s	ASTM D2196
Ash Content	0.3	wt%	ASTM D1416
Styrene Content	25.0	wt%	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Diblock Content	25.0	wt%	Internal Method
Volatiles	0.2	wt%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1 sec)	51		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(300% Strain, 25°C)	2.90	MPa	ASTM D412
Tensile Strength ²(Yield, 25°C)	13.1	MPa	ASTM D412
Tensile Elongation ³(Break, 25°C)	1200	%	ASTM D412

Note Message
1 .	25 Wt.% in toluene
2 .	25 Wt.% in toluene
3 .	25 Wt.% in toluene

Resin Grade	Manufacturer	Category	Trademark
VITAMIDE® BY36BK6595	Jackdaw Polymers	Nylon 6	VITAMIDE®
Delta PER-3G20	Delta Polymers	PE, Unspecified	Delta
KOCETAL® GF702WH	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®
Hyundai EP PA6 LS385	HYUNDAI EP Co., Ltd.	Nylon 6	Hyundai EP PA6
LNP™ STAT-KON™ OE008A compound	SABIC Innovative Plastics Europe	PPS, Branched	LNP™ STAT-KON™