Order Products : sales@su-jiao.com
DynaMix™ 2045-BRD
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8TIgli_DynaMix-2045-BRD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Detectable Polyamide 66 Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 40.0 | MPa | |
| Break | 39.3 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 7.0 to 9.0 | % | |
| Break | > 30 | % | |
| Flexural Modulus | 1450 | MPa | ASTM D790 |
| Flexural Strength | 48.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 110 to 210 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 to 93.3 | °C | |
| Drying Time | 3.0 to 6.0 | hr | |
| Rear Temperature | 254 to 293 | °C | |
| Middle Temperature | 260 to 293 | °C | |
| Front Temperature | 266 to 293 | °C | |
| Nozzle Temperature | 271 to 293 | °C | |
| Processing (Melt) Temp | 271 to 293 | °C | |
| Mold Temperature | 93.3 to 113 | °C | |
| Injection Rate | Moderate | ||
| Screw Speed | 20 to 100 | rpm | |
| Clamp Tonnage | 4.1 to 6.9 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® AMNO TL | Arkema | Nylon 12 | Rilsan® |
| MTEGRITY™ LLDPE LL104AA | M. Holland Company | LLDPE | MTEGRITY™ LLDPE |
| ALTECH® PA66 A 2035/507 GF35 EF | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Grilamid® LVX-50H black 9230 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| INEOS PP H02C-00 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
