Order Products : sales@su-jiao.com

UNITAL® Lf13

Category:	Acetal (POM) Homopolymer , Acetal (POM) Homopolymer
Manufacturer:	Nytef Plastics, Ltd.
Trademark:	UNITAL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8RxzKI_UNITAL-Lf13.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

UNITAL® Acetal (polyoxy-methylene) offers design engineers a superior blend of strength, stiffness, lubricity, and dimensional stability. These properties, along with inherent machining ease, have made UNITAL one of the most widely used engineering grade thermoplastics. To meet specific application configurations and to maximize production efficiencies, Nytef Plastics offers a broad array of UNITAL Acetal stock shapes. These materials include both homopolymer (DELRIN®) and copolymer unfilled grades as well as PTFE-filled grades for enhanced wear resistance. Nytef also offers an electrically conductive grade of UNITAL Acetal that is used in the microelectronics industry to dissipate static electric charges.

Base resin: Acetal Homopolymer, 13% PTFE Powder filled - Low friction, FDA Compliant, brown color

General Information
Filler / Reinforcement	PTFE Micropowder, 13% Filler by Weight
Features	Good Dimensional Stability Good Wear Resistance High Stiffness High Strength Homopolymer Low Friction Low Moisture Absorption Lubricated Machinable
Uses	Automotive Applications Bearings Bushings Electrical Parts Electrical/Electronic Applications Fluid Handling Food Service Applications Gears Molds/Dies/Tools Pump Parts Valves/Valve Parts Wear Strip
Agency Ratings	FDA Unspecified Rating USDA 3A USDA Unspecified Approval
Appearance	Brown
Forms	Preformed Parts Rod

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.48	g/cm³	ASTM D792
Water Absorption			ASTM D570
24 hr	0.23	%
Saturation	0.80	%

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	89		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	4140	MPa	ASTM D638
Tensile Strength	55.2 to 58.6	MPa	ASTM D638
Tensile Elongation (Break)	15 to 30	%	ASTM D638
Flexural Modulus	2830	MPa	ASTM D790
Flexural Strength	93.1	MPa	ASTM D790
Compressive Strength	107	MPa	ASTM D695
Coefficient of Friction	0.16

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	43	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	113	°C	ASTM D648
Continuous Use Temperature	85.0	°C	Internal Method
Peak Melting Temperature	175	°C	ASTM D3418
CLTE - Flow	9.4E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+15	ohms·cm	ASTM D257
Dielectric Strength ¹	16	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	3.10
1 MHz	3.10
Dissipation Factor (60 Hz)	9.0E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Flame Rating	HB		UL 94

Note Message
1 .	Method A (Short-Time)

Resin Grade	Manufacturer	Category	Trademark
PRE-ELEC® TPE 1502	Premix Oy	TPE	PRE-ELEC®
Delta LLDPE 2020	Delta Polymers	LLDPE	Delta
IDI STC 4450B	IDI Composites International	TS, Unspecified	IDI STC
LNP™ LUBRICOMP™ RFL32 compound	SABIC Innovative Plastics	Nylon 66	LNP™ LUBRICOMP™
POLYfill PPC GF5020	Polykemi AB	PP Copolymer	POLYfill