Order Products : sales@su-jiao.com
TAIRILAC WF3300
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Formosa Plastics Corporation |
| Trademark: | TAIRILAC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8PQeu7_TAIRILAC-WF3300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FCFC ASA resin WF3300 meet the requirements of UL and the certificates of environmental protection. |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.05 | g/cm³ | ASTM D792 |
| 23°C | 1.05 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 26 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage - Flow (23°C) | 0.40 - 0.70 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| Class R, 23°C | 100 | ASTM D785 | |
| R scale, 23°C | 100 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| 23°C | 47.1 | MPa | ASTM D638 |
| 23°C | 47.0 | MPa | ISO 527-2 |
| Flexural Modulus (23°C) | 2950 | MPa | ASTM D790, ISO 178 |
| Flexural Strength (23°C) | 79.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C, 6.35 mm) | 200 | J/m | ISO 180, ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 12.7 mm) | 90.0 | °C | ASTM D648, ISO 75-2/A |
| Vicat Softening Temperature | 105 | °C | ISO 306/A, ASTM D1525 1 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, All Colors) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 85.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Mold Temperature | 40.0 - 80.0 | °C | |
| Injection Pressure | 58.8 - 108 | MPa |
| Injection instructions |
|---|
| Screw Temperature: 180 to 220°C |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Battery GPP1005M-EX8 | S&E Specialty Polymers, LLC | TPO | S&E Battery |
| Sarlink® TPV 4139D | Teknor Apex Company | TPV | Sarlink® TPV |
| Vinnolit® EP 7555 | Vinnolit GmbH & Co. KG | PVC Homopolymer | Vinnolit® |
| NuSil MED-4086 | NuSil Technology | Silicone | NuSil |
| Aurora PVC AP2261 Series | Aurora Plastics, Inc. | PVC, Unspecified | Aurora PVC |
