Vipel® F774-BBC-00

Category:	Polyester Alloy , Polyester Alloy
Manufacturer:	AOC, L.L.C.
Trademark:	Vipel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8PFilp_Vipel-F774-BBC-00.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Vipel® Corrosion High-Cross Linked, Terephthalic Polyester Resin Vipel® F774-PTA series is a high cross-linked terephthalic polyester resin. Vipel F774 series resin are recognized by underwriters laboratories for meeting the requirements of UL 1316 and UL 1746 Part II and Part III. Vipel® F774 series resin were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels UL Recognition AOC's Vipel® F774 series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III. Corrosion Resistance Vipel® F774 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc. Food and Drug All resins in this datasheet are manufactured from raw materials that are listed in FDA regulation Title 21 CFR 177.2420. It is the fabricator's responsibility to also be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F for at least 4 hours. After post curing it should be washed with soap and water and rinsed.

Message

Vipel® Corrosion High-Cross Linked, Terephthalic Polyester Resin

Vipel® F774-PTA series is a high cross-linked terephthalic polyester resin. Vipel F774 series resin are recognized by underwriters laboratories for meeting the requirements of UL 1316 and UL 1746 Part II and Part III. Vipel® F774 series resin were developed to meet the demanding requirements of
underground petroleum storage tanks that contain oxygenated fuels

UL Recognition
AOC's Vipel® F774 series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.

Corrosion Resistance
Vipel® F774 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Versatile
Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Food and Drug
All resins in this datasheet are manufactured from raw materials that are listed in FDA regulation Title 21 CFR 177.2420. It is the fabricator's responsibility to also be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F for at least 4 hours. After post curing it should be washed with soap and water and rinsed.

General Information
Features	Acid Resistant Crosslinkable Food Contact Acceptable Good Corrosion Resistance Solvent Resistant Terephthalic
Uses	Coating Applications Filaments Fuel Tanks
Agency Ratings	FDA 21 CFR 177.2420 UL 1316 UL 1746 Part II & Part III
Forms	Liquid
Processing Method	Filament Winding Hand Lay-up Spraying

Hardness	Nominal Value		Test Method
Barcol Hardness	46		ASTM D2583

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3860	MPa	ASTM D638
Tensile Strength (Yield)	80.7	MPa	ASTM D638
Tensile Elongation (Break)	2.7	%	ASTM D638
Flexural Modulus	3860	MPa	ASTM D790
Flexural Strength	119	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	146	°C	ASTM D648

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity ¹(25°C)	400	cP
Post Cure Time (82°C)	4.0	hr
Exotherm
Gel to Peak	24.0	min
Peak	140	°C
Gel Time (25°C) ²	16.0	min

Additional Information	Nominal Value	Unit
HAP Content	45	%

Note Message
1 .	Brookfield RV viscosity spindle 2 at 30 rpm
2 .	Gel time with 0.25% Cobalt 6% and 1.25% MEKP (18 grams mass)

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P3899	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
PrimoFlo 50A-300	KMI Group Inc.	SEBS	PrimoFlo
RAMAPET® N1	Indorama Ventures PCL	PET	RAMAPET®
NIMA HL 18400	Ovation Polymers Inc.	HDPE	NIMA
CYCOM® 970	Cytec Industries Inc.	Epoxy	CYCOM®