| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Franplast S.r.l. |
| Trademark: | Franprene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8P4Nzv_Franprene-TGA-2270.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
Compact and opaque compound. Ideal for the manufacturing of products with good technical qualities, such as toughness and tear strength. Over-moulding on PP is possible. Application:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 90 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 70 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 4.00 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break | 600 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 25 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -30 to 70 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Time | 0.0 | hr | |
| Rear Temperature | 165 to 185 | °C | |
| Middle Temperature | 170 to 190 | °C | |
| Front Temperature | 175 to 195 | °C | |
| Nozzle Temperature | 180 to 200 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBESTA 3020X15 | UBE America, Inc. | Nylon 12 | UBESTA |
| Ultramid® B3WG6 GIT BK807 | BASF Corporation | Nylon 6 | Ultramid® |
| Borealis PP RB361 | Borealis AG | PP, Unspecified | Borealis PP |
| Europrene® SOL T 6306 | Versalis S.p.A. | SBS | Europrene® |
| POCAN® A 3131 000000 | LANXESS Corporation | PBT+ASA | POCAN® |