Order Products : sales@su-jiao.com
Endura® FR-6780
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | PMC Group Polymer Products |
| Trademark: | EnDura® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8Ows9G_Endura-FR-6780.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Endura® FR-6780 is a ready-to-use non-blooming polypropylene copolymer compound. It is designed for injection molding applications which require a UL-94 rating of V-0 at thicknessess of 0.062" or greater. Endura® FR-6780 has a low specific gravity which can result in lower material costs for molded parts. Endura® FR-6780 has been specifically formulated to essentially eliminate the possibility of surface bloom. Applications Endura® FR-6780 is designed for injection molding of battery casings and similar parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 21 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 24.1 | MPa | |
| Break | 15.9 | MPa | |
| Tensile Elongation (Break) | 70 | % | ASTM D638 |
| Flexural Modulus 1 | 1190 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Gardner Impact | 91000 | g | ASTM D5420 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.57 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B33 UV | NUREL, S.A. | Nylon 6 | Promyde® |
| TEREZ PA 6.6 7750 TC | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Titanvene™ HD5401GA | PT. TITAN Petrokimia Nusantara | HDPE, HMW | Titanvene™ |
| NatureFlex™ 140NP | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| Ad-Tech Epoxy EL-335 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
