Order Products : sales@su-jiao.com
KRATON® D1118 K
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8OlaA0_KRATON-D1118-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below.
Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 10 | g/10 min | |
| Antioxidant Additive 1 | 0.15 to 0.40 | % | Internal Method |
| Ash Content | |||
| KT, Talc | 0.40 to 0.65 | % | Internal Method |
| KTM | 4.0 to 6.0 | % | |
| Polystyrene Content | 31 to 35 | % | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Viscosity - solution (Toluene) 25%wt (25°C) | 470 to 790 | mPa·s | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 78.0 | ||
| Styrene/Rubber ratio | 33/67 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 74 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(300% Strain) | 1.21 | MPa | ASTM D412 |
| Tensile Strength 3(Yield) | 1.72 | MPa | ASTM D412 |
| Tensile Elongation 4(Break) | 600 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Measured on films cast from a solution in toluene |
| 3 . | Measured on films cast from a solution in toluene |
| 4 . | Measured on films cast from a solution in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spectar™ Frost Copolyester | Eastman Chemical Company | Copolyester | Spectar™ |
| TOTAL Polystyrene 3241 | TOTAL Refining & Chemicals | PS (HIPS) | TOTAL Polystyrene |
| 4LOY® 10E27200 | 4Plas | PC+ABS | 4LOY® |
| ARMAMID® PA CM 25-2AP | Poly Plastic | Nylon 6 | ARMAMID® |
| Durolon® G2530 | Unigel Plásticos | PC | Durolon® |
