Category: | PP, Unspecified , Polypropylene |
Manufacturer: | SO.F.TER. SPA |
Trademark: | Polifor® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | 8LDEIG_Polifor-E-12-TR-10-NATURALE-Y1.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Elastomer modified polypropylene, 10% mineral filled |
General Information | |
---|---|
Filler / Reinforcement |
|
Uses |
|
Agency Ratings |
|
Appearance |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength (Yield) | 13.0 | MPa | ASTM D638 |
Tensile Elongation (Break) | 100 | % | ASTM D638 |
Flexural Modulus | 370 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (23°C) | 400 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Vicat Softening Temperature | 88.0 | °C | ASTM D1525 1 |
Flammability | Nominal Value | Test Method | |
---|---|---|---|
Flame Rating | UL 94 | ||
1.60 mm | HB | ||
3.20 mm | HB |
Injection | Nominal Value | Unit | |
---|---|---|---|
Rear Temperature | 190 | °C | |
Middle Temperature | 210 | °C | |
Front Temperature | 230 | °C | |
Mold Temperature | 50.0 to 70.0 | °C |
Note Message | |
---|---|
1 . | Rate A (50°C/h), Loading 2 (50 N) |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
SEMICOSIL® 911 A/B | Wacker Chemie AG | Silicone | SEMICOSIL® |
TUFNYL® RGF 30 FRO GREY | SRF Ltd. | Nylon 66 | TUFNYL® |
Bergamid™ B700 G15 H VN | PolyOne Corporation | Nylon 6 | Bergamid™ |
INSULCAST® RTVS 3-95-2 | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® RTVS |
Hostacom ERS 227N D61395 | LyondellBasell Industries | PP Copolymer | Hostacom |