Order Products : sales@su-jiao.com
GLAMIDE® T-656E
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | GLAMIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8KmAGr_GLAMIDE-T-656E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GLAMIDE®T-656E is a polyamide 66 (nylon 66) product,. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.12 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| 1.00 mm | 0.60 - 1.2 | -- | % | ASTM D955 |
| 3.00 mm | 1.5 - 2.2 | -- | % | ASTM D955 |
| Water Absorption | ASTM D570 | |||
| 24 hr | 1.1 | -- | % | ASTM D570 |
| Equilibrium, 65% RH | 2.4 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield, -40°C | 95.0 | 90.0 | MPa | ASTM D638 |
| Yield, 23°C | 70.0 | 45.0 | MPa | ASTM D638 |
| Yield, 80°C | 30.0 | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 52 | 200 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | |||
| -40°C | 3100 | 2900 | MPa | ASTM D790 |
| 23°C | 2700 | 1300 | MPa | ASTM D790 |
| 80°C | 800 | 400 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | |||
| Yield, -40°C | 125 | 115 | MPa | ASTM D790 |
| Yield, 23°C | 96.0 | 70.0 | MPa | ASTM D790 |
| Yield, 80°C | 50.0 | 38.0 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 5.00 | -- | mg | ASTM D1044 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 100 | 130 | J/m | ASTM D256 |
| 23°C | 150 | 400 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 215 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 68.0 | -- | °C | ASTM D648 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 21 | 14 | kV/mm | ASTM D149 |
| Arc Resistance | 120 | 110 | sec | ASTM D495 |
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | HB | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Comparative Tracking Index, IEC Method: >600 V |
| 调节后的 Tensile Elongation, ASTM D638, 23°C: >200 %Notched Izod Impact Strength, ASTM D256, 23°C: >400 J/mVolume Resistivity, ASTM D257: 1e10 to 1e11 ohm-mComparative Tracking Index, IEC Method: >600 V |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 270 - 290 | °C | |
| Mold Temperature | 40.0 - 80.0 | °C | |
| Injection Pressure | 30.0 - 40.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WeatherPro™ Plexiglas® DR®/ABS | Spartech Plastics | ABS+Acrylic | WeatherPro™ |
| ADENE OCJB | A.D. Compound spa | PP Homopolymer | ADENE |
| DOMAMID® A1-006-N2-N | DOMO Engineering Plastics GmbH | Nylon 6 | DOMAMID® |
| LUVOCOM® 20-0778 schwarz | Lehmann & Voss & Co. | PPA | LUVOCOM® |
| Sylvin 9067-95C BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
