Order Products : sales@su-jiao.com
Cri-Line LC-815
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Cri-Tech, Inc. |
| Trademark: | Cri-Line |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8K4thI_Cri-Line-LC-815.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 66% Fluorine copolymers formulated for low cost. LC compounds are used in lathe cut and custom molded goods, including value stem seals. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.83 | g/cm³ | |
| Fluorine Content | 66 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (100% Strain) | 6.01 | MPa | |
| Tensile Strength | 13.1 | MPa | |
| Tensile Elongation (Break) | 190 | % | |
| Compression Set 1(200°C, 22 hr) | 18 | % |
| Note Message | |
|---|---|
| 1 . | Plied discs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 GR30 NL RM | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| THERMOLAST® K TC6SCE (Series: SCR) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Ultraform® N 2320 003 BK120 Q600 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Yanshan PE LD117 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| NuSil CV3-2640 | NuSil Technology | Silicone | NuSil |
