Order Products : sales@su-jiao.com
EBAC® SP1802
| Category: | EnBA , Ethylene n-Butyl Acrylate Copolymer |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | EBAC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8FX2k9_EBAC-SP1802.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EBAC resins adhere to and are compatible with a wide range of materials including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVdC, unplasticized PVC and other polar polymers. These resins are less crystalline and softer than polyethylenes. They are non-corrosive at extrusion temperatures and have excellent thermal stability over the full processing temperature range. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.927 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| n-Butyl Acrylate Content | 22.5 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 13.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 850 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -73.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 59.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 86.0 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ LDPE 450E | The Dow Chemical Company | LDPE | DOW™ LDPE |
| FHR Polypropylene AP7710-HS | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| DuraGrip® DGR 6850NC | Advanced Polymer Alloys | TPE | DuraGrip® |
| Hax™ HFX 035/3 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| PolyFibra® PF-AHD01 | FuturaMat | ABS | PolyFibra® |
