Order Products : sales@su-jiao.com
Stirol UPM-424 (extra)
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | JSC CONCERN STIROL |
| Trademark: | Stirol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 87qcFI_Stirol-UPM-424-extra-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPM-424 is for manufacturing of sheets, inside details for refrigerators (except chambers with operating mode below minus 18°C and with polyurethane foam heat insulation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1 | 3.0 to 4.5 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Bound Styrene | < 0.1 | % | |
| Ash Content | > 1.1 | % | |
| Purity 2 | 20.0 | ||
| Rubber Content | 20.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strain (Break) | > 40 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 8.0 | kJ/m² | ISO 179 |
| Note Message | |
|---|---|
| 1 . | ±10% |
| 2 . | Disc surface should be clean. It is allowed one insertion with diameter 0,2-0,3 mm at the surfaces of disks converting to area, cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3650 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Daelim Po1y® LH7200 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Delta HDPE 5518 | Delta Polymers | HDPE | Delta |
| Durez® 31906 (Injection) | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| ELASTOSIL® R 420/60 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
