Order Products : sales@su-jiao.com
Silmar® SIL93AE-1958AL
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Interplastic Corporation |
| Trademark: | Silmar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 85SIXz_Silmar-SIL93AE-1958AL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
These high-performance resins are mixed with granite effect fillers and spray-applied to form decorative coatings on sinks, countertops and wall panels. They resist draining when applied to vertical surfaces. Silmar granite effect resins are formulated with isophthalic, NPG polymers and acrylic modified (MMA) to withstand water and higher heat, resist scratches and protect against fading and discoloration caused by UV light. These resins produce a solid void-free surface that is resistant to staining. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Gel to Peak | 7.00 to 11.0 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Viscosity | |||
| Brookfield HBT 1 | 2.8 to 4.2 | Pa·s | |
| Brookfield HBT 2 | 18 to 28 | Pa·s | |
| Gel Time | 7.0 to 11 | min |
| Note Message | |
|---|---|
| 1 . | RV # 4 at 20 RPM |
| 2 . | RV #4 at 2 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Polyamide Elastomer XPA 9068F1 | UBE Industries, Ltd. | TPA-ET | UBE Polyamide Elastomer |
| ASTALAC™ ASA 302 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| HIPOLEN P® EA 5S | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
| Hylon® N2000HL2 | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
| Latigea B01 F1 | LATI S.p.A. | PLA | Latigea |
