Order Products : sales@su-jiao.com
SumiDurez PM 8180
| Category: | Phenolic , Phenolic |
| Manufacturer: | SumiDurez Singapore Pte Ltd |
| Trademark: | SumiDurez |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 84fae2_SumiDurez-PM-8180.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PM 8180 Phenolic is a two-stage special purpose molding compound. It is especially designed for large volume molding with rapid cure property. Typical applications include ashtrays for automobiles. JIS Type GE |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | JIS K6911 |
| Apparent Density | 0.65 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow (Transfer Molded) | 0.80 | % | JIS K6911 |
| Water Absorption (24 hr) | 0.30 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | 85.0 | MPa | JIS K6911 |
| Compressive Strength | 210 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.0 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 180 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 10 | kV/mm | JIS K6911 |
| Insulation Resistance | JIS K6911 | ||
| -- 2 | 1.0E+10 | ohms | |
| -- 3 | 1.0E+9 | ohms |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 60 V/sec |
| 2 . | Before Boiling |
| 3 . | After Boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 0553 | Melos GmbH | TPO (POE) | Melos™ |
| Delrin® 500PE BK602 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Elastron® G G300.A50.B | Elastron USA, Inc. | SEBS | Elastron® G |
| KOPA® KN133G10 | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| PCC HD 5502 GA | PCC Plastics & Consultations Center | HDPE | PCC |
