Borlink™ LS4201S

Category: PE, Unspecified , Polyethylene
Manufacturer: Borealis AG
Trademark: Borlink™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 7zBh4A_Borlink-LS4201S.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Borlink LS4201S is a crosslinkable natural polyethylene compound based on Supercure technology, specially designed for insulation of energy cables.
General Information
Features
  • Crosslinkable
  • Good Electrical Properties
Uses
  • Insulation
  • Wire & Cable Applications
Agency Ratings
  • AEIC CS9
  • HD 632 S1
  • ICEA S-108-720
  • IEC 60840
  • IEC 62067
Processing Method
  • Extrusion
PhysicalNominal ValueUnitTest Method
Density (Base Resin)0.922g/cm³ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)2.0g/10 minISO 1133
Moisture < 200ppmKarl Fisher
ThermalNominal ValueUnitTest Method
Hot Set 1IEC 60811-507
    Elongation under load : 200°C 75%
    Permanent deformation : 200°C 5.0%
Additional InformationNominal ValueUnitTest Method
Gottfert Elastograph 0.56 to 0.67N·mISO 6502
Methanol Wash < 800ppmInternal Method
Scorch Time - t10 > 1.0minISO 6502
MechanicalNominal ValueUnitTest Method
Tensile Stress > 17.0MPaISO 527-2/250
Tensile Strain (Break)> 450%ISO 527-2/250
AgingNominal ValueUnitTest Method
Change in Tensile Strain at Break in Air (135°C, 168 hr)< 20%IEC 60811-401
ElectricalNominal ValueUnitTest Method
Volume Resistivity > 1.0E+16ohms·cmIEC 60093
Electric Strength 2> 30kV/mmIEC 60243-1
Dielectric Constant (50 Hz)2.30IEC 60250
Dissipation Factor (50 Hz)3.0E-4IEC 60250
ExtrusionNominal ValueUnit
Melt Temperature 125 to 135°C
Note Message
1 .0.20 MPa
2 .50 Hz
Resin Grade Manufacturer Category Trademark
Mecoline S RDX 1212 F Melos GmbH TP, Unspecified Mecoline
TechnoMid A230 FL TechnoCompound GmbH Nylon 66 TechnoMid
Axiall PVC 19481 Axiall Corporation PVC, Flexible Axiall PVC
Hanwha Total PP TB32R HANWHA TOTAL PETROCHEMICALS Co., Ltd. PP, High Crystal Hanwha Total PP
LNP™ STAT-KON™ KX02764 compound SABIC Innovative Plastics Acetal (POM) Copolymer LNP™ STAT-KON™