Order Products : sales@su-jiao.com
Ravago Compounds PP-5342-9000
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Ravago Manufacturing Americas, LLC |
| Trademark: | Ravago Compounds |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7xSRPR_Ravago-Compounds-PP-5342-9000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP-5342-9000 is black 20% Talc reinforced polypropylene compound designed for injection molding applications. The product is formulated to offer excellent heat stability. This product is suitable for applications such as appliance and automotive parts. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 - 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 - 16 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | > 32.1 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 1(23°C) | > 2340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | > 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | > 110 | °C | ASTM D648 |
| 1.8 MPa, not annealed | > 67.8 | °C | ASTM D648 |
| Thermal stability- 1000 hours (150°C) | Pass | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 - 93.3 | °C | |
| Drying Time | 0.0 - 8.0 | hr | |
| Rear Temperature | 193 - 238 | °C | |
| Middle Temperature | 193 - 238 | °C | |
| Front Temperature | 193 - 238 | °C | |
| Nozzle Temperature | 193 - 238 | °C | |
| Mold Temperature | 26.7 - 60.0 | °C | |
| Back Pressure | 0.00 - 0.689 | MPa | |
| Screw Speed | 50 - 150 | rpm |
| Injection instructions |
|---|
| Hot Runner Temperature (if applicable): 420 to 450°F |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECNOBLEND B52 | Taro Plast S.p.A. | ABS+Nylon | TECNOBLEND |
| HOPELEX PCG-2205 | Lotte Chemical Corporation | PC | HOPELEX |
| Plexar® PX3216 | LyondellBasell Industries | LLDPE | Plexar® |
| Daelim Po1y® VL0003 Sheet | DAELIM INDUSTRIAL CO., LTD. | Plastomer | Daelim Po1y® |
| Evoprene™ GC 920 | Mexichem Specialty Compounds Inc. | TPE | Evoprene™ GC |
